View Attach Info
This is version . It is not the current version, and thus it cannot be edited.
[Back to current version]   [Restore this version]

Usa il tab che funziona !!!

Comandi base

  • show version
  • show running config

Router cisco 2610#

Come configurare un’interfaccia:

Interfaccia serial 0/0 per hdsl frame relay#

conf t
interface serial 0/0
no ip address
no shutdown 
incapsulate frame-relay
framerelay lmi-type cisco
control-c

Interfaccia 0/0.1 per il punto punto seriale#

conf t
Interface serial 0/0.1 point-to–point
Ip address 81.114.19.194 255.255.255.252
frame-relay interface-dlci  199 IETF	//Note: 199 è il numero sulla scheda attivazione
control-c

Note:

Due IP in 1 Ethernet : ip address 81.114.19.194 255.255.255.252 secondary

Reload in 10 reload il sistema in 10 minuti (per non far cazzate….)

Copy running-config startup config rende operativi i cambiamenti

Ip route 0.0.0.0 0.0.0.0 serial 0/0.1 setto il default gateway

Sulla Eth0/0 no ip nat inside

Add new attachment

Only authorized users are allowed to upload new attachments.
« This particular version was published on 14-Apr-2010 14:30 by turchetti.